|
|
|
Anchors on this webpage (FREE
SHIPPING OVER $100*):
Trolling Sea Anchors Jim Buoy
Folding Grapnel Anchors Sea-Dog
Navy Anchors Sea-Dog
Mushroom Anchors Sea-Dog
|

Click for larger image
Jim Buoy / Cal-June

#929 Storm Sea Anchor

#929X Sea Anchor Oil Can |
TROLLING
SEA ANCHORS BY JIM BUOY Vinyl coated nylon Trolling
Sea Anchors are equipped with 1" polypropylene shroud lines
(except #925) and easily collapses for storage.
Model #925 for use with Horseshoe Buoy.
Model #926, 927 & 928 are used primarily for trolling and fishing.
They are not storm sea anchors. Do NOT exceed 5 knots while trolling.
Model #929 is a Storm Sea Anchor for use on rafts and vessels
up to 50 feet in length. Manufactured from vinyl-covered heavy nylon
and has unmatched strength and durability. Will not rot or mildew.
Stainless steel fittings with 1" nylon webbing. U.S. Coast Guard
approval #160.019/15/0.
Model #929X is a Sea Anchor Oil Can. One (1) Gallon size,
galvanized steel. U.S. Coast Guard approved construction. To be
used with Model #929 36" Storm Sea Anchor.
|
|
FOLDING GRAPNEL ANCHORS BY
SEA DOG Hot-dipped galvanized iron anchors with forged flukes.
Inexpensive and easy to store, Sea-Dog Folding Grapnel Marine Anchors make an
ideal back-up anchor for larger boats, or can be used as a primary anchor for
smaller boats, sailboats, and inflatable boats.
NOTE: Weights will vary due to metal and coating content. Listed weights
are approximate.
Due to the weight of larger anchors,
FREE SHIPPING OVER $100* DOES NOT apply
to anchors listed below. SailboatStuff will contact you with actual
shipping costs upon receiving your order.
|
|
NAVY ANCHORS BY SEA-DOG
The Navy Anchors are fabricated in Cast Iron. Available in Aluminum Paint
or Black Vinyl Coating.
NOTE: Allow an additional 1/16" to 3/32" for Vinyl Coating on
all measurements.
NOTE: Weights will vary due to metal and coating content. Listed weights
are approximate.
Due to the weight of larger anchors,
FREE SHIPPING OVER $100* DOES NOT apply
to anchors listed below. SailboatStuff will contact you with actual
shipping costs upon receiving your order.
|
|
MUSHROOM ANCHORS BY SEA DOG
The Mushroom Anchors are fabricated in Cast Iron. Available in Aluminum Paint
or Black Vinyl Coating.
NOTE: Allow an additional 1/16" to 3/32" for Vinyl Coating on
all measurements.
NOTE: Weights will vary due to metal and coating content. Listed weights
are approximate.
Due to the weight of larger anchors,
FREE SHIPPING OVER $100* DOES NOT apply
to anchors listed below. SailboatStuff will contact you with actual
shipping costs upon receiving your order.
|
|
|