Sur-Moor™ Mooring Buoys
Home Page 
|
|
|
|
|
Mooring Buoys and
Parts on this webpage (FREE
SHIPPING OVER $100*): |
 Sur-Moor™ T3C™ Mooring Buoy Tube-through-the-Center Design Taylor Made Products  Sur-Moor™ Hard Skin Buoy Galvanized Eyebolt and Swivel Design Taylor Made Products |
SUR-MOOR™
BUOYS BY TAYLOR MADE PRODUCTS The sole purpose of
the mooring buoy is to support the mooring chain. The two preferred
designs
for
mooring
buoys are a traditional buoy with hardware or a buoy with a tube
through
the center. Both offer reliable flotation and will last for several
seasons, depending upon the salinity of the water. Obviously, freshwater
applications will extend the useful life of any mooring system. A
permanent mooring system, when properly designed, should securely
position a boat so that it can be left unattended, with little attention,
for long periods of time. Each system usually consists of a mooring
buoy (to float the chain), a mooring anchor and a length of chain
(running between the anchor and the mooring buoy) . Also the proper
ground tackle includes correct sized galvanized shackles
and swivels. Always keep
in mind, that the mooring system is only as reliable as the "current"
conditions of the environment. All Taylor-Made Sur-Moor™ Buoys
are built to withstand the constant abuse of most mooring environments.
|
SUR-MOOR™
T3C™ MOORING BUOYS BY TAYLOR MADE PRODUCTS Taylor
Made Products Sur-Moor™
Hard Skin Mooring Buoys are seamless and tough, one-piece polyethylene
shell. Hard skin shells feature ultraviolet light absorbers for
long-term life under the sun. Filled with 2 lbs. density closed-cell
foam to positively displace water. Blue stripe is reflective for
night visibility. Choose between hot-dipped galvanized eyebolt
and swivel design or tube-through-the-center design with double collar
made from rigid PVC tubing. Doesn't include hardware (shackles,
etc.) Three year
warranty on all hard skin buoys. Also, see
Bridle Plate Mooring & Storm Surge Anchor System. | |
Tube-through-the-Center Design Taylor Made Products |
TUBE-THROUGH-THE-CENTER DESIGN |
Galvanized Eyebolt and Swivel Design Taylor Made Products |
GALVANIZED
EYEBOLT AND SWIVEL DESIGN WARNING - Mooring lines must never be tied to the top loop. Mooring lines should always be attached to the anchor chain. |
 Click for larger image Does not include Hardware Taylor Made Products |
SUR-MOOR™
SHACKLE BUOYS BY TAYLOR MADE PRODUCTS Taylor
Made Products Sur-Moor™ Shackle Buoy rope nest design has a built
in cup shape at the top of the buoy that allows the anchor shackle to nest below the buoy surface.
This recessed area helps shield the shackle from contacting the
boat hull while making a convenient nesting place for the pennant
line when the boat departs from the mooring. The hard-skin polyethylene
shell is UV protected to resist the weathering effects of sunlight
and is foam filled to positively displace water. Tube-Through-The-Center
design with blue reflective striping. Three-year flotation warranty
on all hard-skin buoys. Hardware not included; sold separately
(TMP33025 Sur-Moor Mooring
Collar - see below). See warranty
page for full terms of warranties. Also, see
Bridle Plate Mooring & Storm Surge Anchor System. |
 Click for larger image Does not include Hardware Taylor Made Products |
SUR-MOOR™
TAPERED BUOYS BY TAYLOR MADE PRODUCTS The Taylor
Made Products Sur-Moor™
Tapered Buoy design places more floatation area at the waterline
creating a higher visibility mooring. The hard-skin polyethylene
shall is UV protected to resist the weathering effects of sunlight
and is foam filled to positively displace water. Available in the
Tube-Through-The-Center design with blue reflective striping. Mooring
Collars are sold separately (see below). Mooring collar not
available for the 30" Diameter Tapered Buoy. Three-year
flotation warranty on all hard-skin buoys. Hardware not included.
See warranty page for full terms of warranties. Also, see
Bridle Plate Mooring & Storm Surge Anchor System. |
 Taylor Made Products |
SUR-MOOR™ T3C™ MOORING COLLARS BY TAYLOR MADE PRODUCTS Hot-dip galvanized steel collar protects your Taylor Made Products T3C™ buoy from anchor chain wear, prolonging the life of the buoy. Designed to work in combination with standard shackles. Mooring collars are sized to slip into the top of 2" or 2-1/2" tube diameters. |
 Taylor Made Products |
SUR-MOOR™
BUOY HARDWARE BY TAYLOR MADE PRODUCTS 1/2" diameter
hot-dipped galvanized rod with 4" long swivel, 2 galvanized
washers and nylon core lock nut. |
|
|
Made in USA