|
|
|
|
| Dock
Products on this webpage:
Sully Stick Winter Stick
Rubber Mooring Snubber
Piling Caps
Anchor Rode Rider
Single-Shaft Bow Eye
Twin-Shaft Bow Eye
Lanyard - White
Stepsafe™ Dock Steps
StepSafe™ Non-Slip Adhesive Pads
Dock Pro™ Dock Float
Dock Pro™ Dock Cart
Bazooka Bailer
|

Click for larger image
Taylor Made Products
|
SULLY STICK™ WINTER STICK BY TAYLOR
MADE PRODUCTS A long tapered buoy used in place
of a standard round mooring buoy during the winter months. The
Sully Stick Winter Stick has a molded in
eyelet at the top for easy retrieval. The base eyelet is reinforced
the anchor chain. The shape of the Sully stick helps it escape
ice entrapment better
than a round buoy and can extend the useful life of a mooring buoy
by protecting it from the damaging effects of freezing temperatures.
Made in USA
*Buoyancy rating: The number indicated is the maximum flotation
the buoy provides while fully submerged. Fifty percent (50%) of
this value will be the weight the buoy can support at the level
of the blue stripe.
|

Click for larger image
Taylor Made Products
|
RUBBER MOORING SNUBBER BY TAYLOR MADE
PRODUCTS
Mooring Line Shock Compensator made from super elastic isoprene
natural rubber. Taylor Made Products design eliminates the
self-locking internal system, which caused unnecessary stress on
the dock lines. These LineSaver Rubber Mooring Snubbers prevent mooring
line breakage along with compensating for sudden jolting and excess
stretching lines beyond parting strength. The LineSaver also provide
maximum protection against the stress caused by wind, waves, and
wakes. Available in BLACK only.
Absorbs dock line loads and increases dock line life.
NO tools needed to install.
3 Line Sizes to match line diameter
|

Click for larger image
SailboatStuff
|
PILING CAPS BY TAYLOR MADE PRODUCTS
Piling Caps by Taylor Made Product are made from heavy duty polypropylene
and will discourage birds from sitting on top of your pilings.
Available in six (6) diameters
to best fit your needs. Choose from colors in Black or White.
|

Click for larger image
SailboatStuff
|
ANCHOR RODE RIDER
Improves the holding power of your anchor while reducing the amount
of rode needed for anchoring. Rode rider opens in half for easy attachment
to rode. A 5/16" bronze shackle (included) firmly secures unit
to rode while in use. The unit may be positioned at any point along
the rode by adding your own checkline and weight. For use with anchor
line up to 1" diameter. Finished in Polished Bronze.
|

SailboatStuff
|
SINGLE-SHAFT BOW EYE
Single-Shaft Bow Eye features a round eye with alignment studs on
the underside of the eye to maintain the orientation of the eye
when installed. Designed for salt or fresh water use. Nut and washer
included.
|

SailboatStuff
|
TWIN-SHAFT BOW EYE
Twin-Shaft Bow Eye has a trapezoidal shape eye with two (2) heavy
duty shafts which connect it to the hull. Nuts and washers included.
|

SailboatStuff
|
LANYARD - WHITE
Lanyard are hand braided white nylon; perfect for ringing a bell or
to help get a better grip on a snap shackle release. Available in
three lengths.
|
Taylor Made Products
|
STEPSAFE™ DOCK STEPS BY TAYLOR
MADE PRODUCTS
Molded in durable U.V. resistant Polyethylene, Taylor Made Products
Stepsafe™ Dock Steps are offered in three different tread step models.
On the top of each step, Taylor Made Products' own StepSafe™
non-slip pad is adhered for additional slip protection while boarding.
1 1/2" wide flange provides adequate mounting surface for
docks. Cleans easily with soap and water. Additional hand rails are available
for two- and three-step models, sold separately.
Made in USA
|

Taylor Made Products
|
STEPSAFE™ NON-SLIP ADHESIVE PAD
BY TAYLOR MADE PRODUCTS Taylor
Made Products StepSafe™ Non-Slip Adhesive Pads will retain
its grip wet or dry, and is resistant to gas, oil, and UV rays. Taylor Made
Products combined ToughTek™ with a soft padded feature for a safe, secure climb
aboard. Also great for the pool area, aluminum ladders, or any surface
where slipping is a concern. Comes with a pressure sensitive backing
for easy installation, and trims easily with scissors to almost
any size or shape. Use on gunnels, swim platforms, stair rungs,
transoms, or anywhere you step and could slip!
Made in USA
|

Taylor Made Products
|
DOCK FLOAT BY TAYLOR MADE PRODUCTS Taylor
Made Products Dock Floats are fabricated as a seamless, UV resistant black polyethylene shell
filled with closed-cell foam. The tough outer shell resists impact and protects
the foam core from saltwater, gasoline, and most chemicals. Thick mounting flange
can be drilled to accommodate attachment fasteners for easy mounting
to any dock design. 8-year flotation warranty. Available in three
(3) different sizes.
Made in USA
|

Click for larger image
Taylor Made Products
|
DOCK PRO™ DOCK CART BY TAYLOR MADE PRODUCTS Curved
handle design reduces bending-over, making the Dock Pro™ Dock
Cart easier to handle than conventional carts, while the unique angled tub
feature provides better leg clearance for maneuvering. The Dock
Pro Dock Cart is simply the easiest way to carry all your gear
from the car to the boat. Features a spacious 7 cubic feet heavy
wall roto-molded poly-tub that will not rust or rot. Zinc coated
corrosion resistant hardware used throughout. Plastic rim wheels with roller
bearings will stand up to the harshest marine environment.
Made in USA
|

Click for larger image
Taylor Made Products
|
BAZOOKA BAILER BY TAYLOR MADE PRODUCTS
The only combination boathook / bailer / power
washer on the market today, this is truly a unique product. As a
boat hook, this product is one of the most durable boat hooks you
will ever own. From it's hook to it's anodized aluminum shaft
only quality parts and materials are used in this product's construction.
The telescopic pole collapses nearly in half for storage and automatically
locks firmly in place when fully extended. Two non-slip grips ensure
a solid hold when fending off from other boats or hauling in a mooring.
As a bailer the 8' model drains nearly a quart per stroke, and
reaches into spaces few bailers can. Simply place the hook under
water and extend the Bazooka Bailer. The piston draws the water
up a small hole located at the end of the hook. Don't worry about
the oil and scum found in the bottom of most bildges, unlike some
rubber washers the nitrile piston is not broken down by such substances,
instead they serve as a healthy dose of lubrication.
Finally, as a power washer, water is expelled from the Bazooka
Bailer approximately thirty six times faster than it's operating
speed, giving it a firing range of over 50 feet and the power to
clean. The Bazooka Bailer is a handy product when cleaning hulls,
cleaning decks or when you find yourself in a water fight!
Bazooka Bailer can get into hard to reach areas
Bail out your boat from the dock or your boat without getting on your knees
Shoots over 50 feet, allows you to clean anchor lines, decks or other hard to reach areas in just seconds
Made to withstand saltwater and bilge oil
|
|
|
|