|
|
|

Click for larger image
Taylor
Made Products
|
WATER
SKI MARKER BUOYS Made from
PVC these Lightweight but durable inflatable buoys will mark your
slalom course in accordance with the AWSA specifications (American Water Ski Association).
Each buoy has a molded-in loop to fasten anchor line and contains
an inflation valve for air pressure adjustment. Buoys are 9" in
diameter. Offered in Green, Yellow and Red colors.
|

Click for larger image
Taylor
Made Products
|
PERSONAL
WATERCRAFT BUOYS This multi-use rugged float
can be used as a pick-up buoy, marker buoy, or fender. Makes a
great marker for water ski events and can be used as a fender for
personal watercraft. Available in white or high visibility fluorescent
colors (all colors not displayed in picture). Taylor Made Product's
unique double color system incorporates a "backup" color
that resists fading. Taylor Made Products fluorescents will retain
their color long after the competition's has faded away. 8" diameter.
|

Click for larger image
Taylor
Made Products
|
SUR-MOOR™
HARD SKIN SHAPED BUOYS Special shaped Taylor Made
Products Buoys for the specific customer needs with the same great
features and benefits of Sur-Moor™ hard skin buoys. Made of
one piece, molded high density polyethylene outer shell and filled
with solid closed-cell foam. All fittings, swivels and rings are
hot dipped galvanized steel (hardware included). Shaped buoy standard
product is colored and marked as shown in picture. Inspected and
tested in accordance with United States Coast Guard (USCG)
regulations. Three
year warranty on all hard skin buoys. Also, see
Bridle Plate Mooring & Storm Surge Anchor System.
Made in USA
|

Taylor Made Products |
REGULATORY
BUOYS
Taylor Made Products manufactures the most rugged and complete line
of navigational Regulatory Buoy in the United States meeting the
stringent requirements of states, municipalities, and private harbors
for many years. Taylor Made Products Regulatory Buoy are used in
the toughest applications.
Regulatory buoy feature rotationally molded high density polyethylene
shells that are UV stabilized. The rotational molding process
allows
for uniform wall thickness without the internal stresses that cause
cracking over time and under extreme temperature changes. This
process
imparts tremendous impact strength to the shell. Choose between
Red Nun, Green Can or Danger Can.
See warranty page for full terms of warranties. Also, see
Bridle Plate Mooring & Storm Surge Anchor System. See below
for Solar Warning Lights. Made in USA
|

Click for larger image
Taylor
Made Products
|
SOLAR
WARNING LIGHTS
- Solar powered light charges during the daylight hours and automatically
turns on at dusk to alert boaters of hazards
- Easily attaches to buoys, docks, moorings, or anything else that needs
night time identification
- The light comes equipped with steady on mode, slow flash (15 times
/ minute) , and fast flash (60 times / minute) all within the
same unit
- Available in white, red, or green LEDs. All come with clear lens
- Unit is constructed with a tough, waterproof (not submersible) plastic
housing to keep the light working in all conditions
- Note: Check with the local agency governing your waterway before installing
|
|
|
|