LED Lights Accessories
Home Page 
|
|
|
| |
LED Light Accessories on this webpage (FREE
SHIPPING OVER $100*): |
 Click for larger image Signal Mate |
POLE MOUNT ADAPTER BY SIGNAL MATE The Pole Mount Adapter is used for mounting a Signal Mate Anchor, Steaming or Steaming/Anchor combination LED Navigation Lights on a 3/4 or 1 inch pole. The adapter is held fast to a pole by 3 set screws. Select 3/4" or 1" pole size. |
 Click for larger image Signal Mate 
| BOW OR STERN PULPIT BRACKET (VERTICAL OR HORIZONTAL MOUNT) BY SIGNAL MATE The Bow or Stern Pulpit Bracket (vertical or horizontal mount) easily installs a Signal Mate LED Navigation Light to any vertical or horizontal rail. Can be used for a new installation or upgrade of a bow or stern navigation light. Select either Black or White Cover. |
 Click for larger image Signal Mate |
CENTERLINE ADJUSTABLE MOUNTING BRACKET BY SIGNAL MATE The Centerline Adjustable Mounting Brackets are used to mount LED Port, Starboard, Stern and Masthead lights. Brackets can be used for side or front mounting and are adjustable for center line corrections. Finished in stainless steel. |
 Click for larger image Signal Mate (Misea Group) |
360 DEGREE NAVIGATION LIGHT BRACKET BY SIGNAL MATE The 360 Degree Navigation Light Bracket is used to mount Signal Mate 360 degree (All-Around) navigation lights. Finished in stainless steel. |
 Click for larger image Orca Green Marine (Misea Group) |
TOP MOUNTING BRACKET BY ORCA GREEN MARINE Mounting bracket designed to mount OGM LED Tri-Anchor and Anchor lights (all versions) to the top of a mast or other flat surface. Multiple mounting holes allow rotation of bracket in various orientations. Constructed of 316 Stainless Steel. |
 Click for larger image Orca Green Marine (Misea Group) |
SIDE MOUNTING BRACKET BY ORCA GREEN MARINE Mounting bracket designed to mount with OGM Tri-Anchor and Anchor LED Lights (all versions) and Masthead/Steaming LED Lights. Multiple mounting holes allow rotation of bracket in various orientations. Constructed of 316 Stainless Steel. |
 Click for larger image Signal Mate |
LED CHART LIGHT MOUNTING COVER BY SIGNAL MATE The LED Chart Light Mounting Cover Cover is made of 1/2" black or white King Starboard Marine polymer. Milled backside allows room to make wire connections using supplied in-line connectors. |
 Click for larger image Signal Mate (Misea Group)  
| TERMINATION COVERS BY SIGNAL MATE Termination Covers are used installing Signal Mate LED Navigation Lights with Centerline Adjustable Brackets (see above). The Termination Covers are sized to cover most footprints of incandescent light fixtures and the backside are machined to allow room for wire termination. Select from small, medium or large termination cover sizes in either black or white color. |
 Click for larger image Signal Mate (Misea Group) |
ROUND BLACK COVER BY SIGNAL MATE The Round Black Cover is used for new and retrofitting LED installations. Round covers have the backside milled out (3/8") for the wire terminations. |
 Click for larger image Orca Green Marine (Misea Group) |
SELECTOR SWITCH FOR LED TRI-ANCHOR LIGHT BY ORCA GREEN MARINE Rugged rotary switch with black anodized faceplate showing 4 positions: Off-Tricolor-Anchor-Strobe. Also includes rear PC board with terminal block for easy connections and built-in 2 amp fuse. Circuit board dimensions are 2.5 x 2.5 inches. Faceplate dimensions are 2.25" wide by 2.5" high. Simply connect incoming power to Batt+ and Batt- terminals, and the TriAnchor light wire black, brown, and blue to marked terminals. Works for both strobe and non-strobe versions of Tri-Anchor Lights. |
 Orca Green Marine (Misea Group) |
REVERSE SWITCH FOR LED TRI-ANCHOR LIGHT BY ORCA GREEN MARINE Three-position toggle switch for 2-wire operation of LED Tri-Anchor Lights. Positions: Tricolor-Off-Anchor. NOT for use on Strobe model Lights. |
|
|