Taylor Made Products Boat Cover Parts on this webpage (FREE SHIPPING OVER $100*):
Boat Cover Support Bows
Die Cast Bow Sockets
Nylon Rail Bow Sockets
Snap Fasteners
"One-Way" Snap Pull Dot Fasteners
Super Snaps
Quick-On Tie-Down Kits
Boat Cover Repair Kits
Adjustable Boat Cover Support Poles
Snaps Fastener Installation Tools
E-Z™ Grommet Set & 12 Packages of 3/8" Grommets
Clinching Ring Pliers & Clinching Ring Packages
Tarp Hooks™

BOAT COVER SUPPORT BOWS BY TAYLOR MADE PRODUCTS Boat Cover Support Bows by Taylor Made Products keep the cover taut and free from pockets that collect water. The bows are offered in fiberglass and sap-free wood in fixed lengths and adjustable models. The bows (except wooden adjustable) may be cut to desired length to supply proper arch to promote proper drainage of the boat cover. Made in USA

• Fiberglass Bows - Super strong and flexible. Will not take a "set." Cut to desired length. Shipped with rubber end covers to grab socket.
• Wooden Bows-Adjustable - Two pieces held by "D" ring.
• Wooden Bows - Strong, Resilient. Sap-free. Cut to desired length.

DIE CAST BOW SOCKETS BY TAYLOR MADE PRODUCTS Die Cast Bow Sockets by Taylor Made Products. Bows mounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gaskets provide snug fit for fiberglass bows. Sold only in pairs.

NYLON RAIL BOW SOCKETS BY TAYLOR MADE PRODUCTS Rail Bow Sockets by Taylor Made Products. Bows mounted in bow sockets are the sure and easy way to keep a boat cover taut and free from water collecting pockets. Sockets can be mounted on any rail system or anywhere on deck wall. Rubber gaskets provide snug fit for fiberglass bows. Accepts any bow. No mounting holes to drill. Includes hardware for fastening bow to socket. Sold in pairs only.

SNAP FASTENERS BY TAYLOR MADE PRODUCTS Cloth, Wood and Machine Screw Snap Fasteners by Taylor Made Products. Standard Snap-on and Snap-off design. Snaps on and off in any direction. Sold in sets of 4, 6 and 10.

"ONE-WAY" SNAP PULL DOT FASTENERS BY TAYLOR MADE PRODUCTS Cloth and Wood "One-Way" Snap Pull Dot Fasteners by Taylor Made Products. Push down on the spot to lock. Lift up on the spot to release. Specially designed for extra holding power. Releases only in the direction of the spot. Sold in sets of 4 or in bulk of 100. Made in USA

SUPER SNAP TARP SNAPS BY TAYLOR MADE PRODUCTS Super Snap Tarp Snaps by Taylor Made Products are portable and easy to use! Simply place the disk underneath the tarp and slide the loop onto the grooved disk. The Super Snap can be attached either semi-permanently, enabling you to slip the disk on and off as needed, or permanently, using nails, screws, etc. Use the end hook for hanging light objects, or run a line through the hole for heavier objects. Sold only in packages of 4. Made in USA

QUICK-ON TIE-DOWN KITS BY TAYLOR MADE PRODUCTS Quick-On Tie-Down Kits by Taylor Made Products attaches to almost any boat cover. Each strap set is eight feet (8') long with a durable quick release buckle. Sun resistant polypropylene webbing. Sold in packages of 2, 8 and 12.

BOAT COVER REPAIR KITS BY TAYLOR MADE PRODUCTS Boat Cover Repair Kits by Taylor Made Products. If you have a torn cover as a result of sharp corners, you can repair it with the deluxe poly/cotton repair kit. One square yard of fabric is supplied with a four (4) ounce bottle of specially designed fabric glue for easy attachment to your cover. Made in USA

ADJUSTABLE BOAT COVER SUPPORT POLE BY TAYLOR MADE PRODUCTS Adjustable Boat Cover Support Pole by Taylor Made Products. Extend the life of your boat cover by preventing water from pooling on top. The standard boat cover support pole has a non-marring tip on each end of a telescoping aluminum tube. A durable plastic knob allows for easy adjustment of the height.

SNAPS FASTENERS INSTALLATION TOOLS BY TAYLOR MADE PRODUCTS Snaps Fastener Installation Tool by Taylor Made Products is easy to use. Complete instructions included. Die and setting tool, packaged as a set.

E-Z™ GROMMET SETS BY TAYLOR MADE PRODUCTS The E-Z™ Grommet Set by Taylor Made Products installs #2 size grommets with 3/8" hole. Set contains hole punch, setting tool, and eighteen (18) #2 Brass Grommets and Washers. Extra 3/8" grommets sold in sets of 12.

CLINCHING RING PLIERS BY TAYLOR MADE PRODUCTS The Clinching Ring Pliers by Taylor Made Products are specially made to grip clinching rings for 3/16" to 1/2" diameter. Spring loaded handles to hold ring until clamped on. Overall length 6-7/8".

TARP HOOKS™ BY TAYLOR MADE PRODUCTS The Tarp Hooks™ by Taylor Made Products. Simply fill an ordinary soda bottle with sand, screw on a detachable Tarp Hook, and you have a versatile and inexpensive weight.