3" STOVE PIPE DECK FITTING Finned design insulates deck from hot stove or heater exhaust gases. 3" stove pipe slides into tapered bottom of adapter. Lower finishing ring is tapped for through bolts and trims cutout inside cabin. Cover has "O" ring seal. (Stove pipe not included). Includes finish ring, cover and key. Finished in Polished Brass and Polished Chrome (over Brass). Fasteners not included.

3 INCH CHARLIE NOBLE STOVE PIPE Use as a smoke head or exhaust vent. Threads into Stove Pipe Deck Fitting (sold separately, see above). 14 threads per inch. Charlie Noble Stove Pipe is finished in Polished Chrome (over Brass) Only. The Stove Pipe Extension is finished in Polished Brass Only.

LOCKER VENT Perfectly sized to finish off the cutout for a locker or drawer. The highly polished finish will complement any interior. Requires four (4) #10 fasteners (not included). Finished in Polished Brass and Polished Chrome (over Brass).

BUTTERFLY VENT STAMPED #304 STAINLESS STEEL These round vents are ideal for lockers and cabinets. The twist knob on the top allows the vent opening to be adjusted from fully closed to fully open. Available in two sizes which are both 3/4" high. Each is pre-drilled for installation, which uses four, #6 round head screws (not included).

MINI CLAM SHELL VENT These small vents are perfect for covering vent holes for battery boxes, water or fuel tanks, or for covering areas of small cables. They come in two sizes and are pre-drilled or installation, which requires three screws (not included).

DECK PLATE 3", 4", 5" and 6" deck plates available. Each Deck Plate comes with an O-Ring seal to help insure water stays out. Pre-drilled for installation. Finished in Polished Stainless Steel and Polished Titan Tuff™ Gold (not available in 6"). Fasteners not included.

Titan Tuff™ Gold is a new PVD (Physical Vapor Deposition) processed stainless steel which has a rich bronze/gold appearance, is three (3) more times abrasion resistant than chrome, easier to clean than stainless steel, highly resistant to corrosion, stands up to any household cleaner and has a 20-year finish guarantee. SailboatStuff & Marine parts, hardware and supplies.

UNIVERSAL DECK PLATE KEY Small pocket tool. Fits shackles, various deck fill sizes, 5/16" and 7/16" hose clamp nuts. Also has screwdriver, bottle opener and 2 holes for attaching lanyards.

HEAVY DUTY HINGED DECK PLATE KEY Hinged key opens to 6". Has two sizes of stainless steel pins, 3/16" pins on one side and 5/16" on the other. Accommodates most caps. Handle drilled for lanyard. Finished in Bronze and Stainless Steel.